1. Getting Started with Automation
  2. Ask the Experts

Ask the Experts

SEARCH QUESTIONS

IN CATEGORY:

FILTER QUESTIONS

BY TECHNOLOGY

AI

Motion Control & Motors

Robotics

Vision

View All Technologies

Viewing Category: All

Show Per Page:

Now displaying: 1-25 of 223 questions
ASK A QUESTION

What type of vision system would you recommend to make sure the correct bar code correlates with the correct part. Error proofing. We have 3D cad model library and I want to take a photo of the seat frame and compare it to Solid Works Cad file.

07/02/2021
Category: Inspection

Where one can download 32-bit and 64-bit clallserial.dll files that are used for serial communication with camera?

03/16/2021
Category: Vision Software

Hi there, I am looking for an inspection system to check tubular plastic injection moulded parts for defects, such as tears and air bubbles. This would need to check both the internal and external walls of the parts. What would you suggest would be the best solution?

03/09/2021
Category: Lighting Equipment

We would like to replace the old PCI analog frame grabber that works for analog camera using RS-170 mono. which companies sell this kind of products that can be programmed in LabWindows CVI? Thanks.

02/08/2021
Category: Optics / Lenses / Filters

Looking for a very small structured light emitter/camera setup for use in dusty outdoor conditions. Recommendations?

01/25/2021
Category: Lighting Equipment

How can we detect an object that is the same color as the background?

12/20/2020
Category: Non-Visible Imaging

Hello, I was wondering if there is a simple way to convert GigEVision to RTSP...has anyone done this?

12/04/2020
Category: System Integration

Does anyone have any data available about the market size / OEM share / channel dynamics for factory automation & logistic vision systems? Am looking to better understand the largest players in the space, long-term growth dynamics, and the role of distributors and integrators within the space. I have seen the general market size data that Cognex puts out, but looking to go a layer deeper. Appreciate any help here.

10/06/2020
Category: Lighting Equipment

What would be the best lighting solution for inspecting glass parts within a polycarbonate plastic enclosure?

07/09/2020
Category: Non-Visible Imaging

Hi I am having an issue where our GigEV transmitter we are trying to develop is correctly being discovered, and connected to. Once the stream settings is updated and the stream enabled I can see on wireshark the GVSP data is coming in fine with no errors and the leader, data and trailer packets is there without errors. But we cannot seem to get this displayed on a host player. We are using eBus Player from Pleora technologies to test. But once the acquisition start command is called I see no image or any update in the stream statistics counters, not even in errors. So I am a bit confused on how to debug further. The destination address and port is fine, the resolution and packet size is fine, the payload size is fine. Is there any more in depth testing software that I do no know about?

04/02/2020
Category: System Integration

Having an issue of image capturing not refreshing after any action on inspection options defined. At first it starts normal, if it found any odd object it asks for action then if I choose any accept or reject imaging stops, if I restart application it works. The application was working fine earlier, what could be causing the problem?

03/16/2020
Category: Vision Software

Hi, I am doing my research project on a vision inspection QC (quality control). For a research purpose i need to know about present limitation , future problems of vision and imaging technology. I also need to know about what will be future topics / industry for QC using vision and imaging technology. Please, give guidance regarding this, it will be very helpful. THANKS!

10/02/2019
Category: Lighting Equipment

what is future requirements/future concept from vision and imaging technology?

10/02/2019
Category: Lighting Equipment

aside from Golden unit, what is the best way to correlate vision systems?

07/22/2019
Category: Lighting Equipment

Hi, I am looking for inspection system which can works for my 2pc alluminium can line to detect the inside defects on the can. Please suggest any ideas

07/22/2019
Category: Lighting Equipment

I am looking for a camera that will detect air bubbles leaking from a fuel line submerged in water.

07/16/2019
Category: Image Sensors

Hello, I was looking through a lot of GigE Vision compliant cameras and I could not find one camera that support All-In packets. Could you provide a manufacture that do ?

04/30/2019
Category: Image Sensors

Good morning, I am carrying out experiments on fish behaviour and for that I need to be filming the trials. In the past I have used CCTV cameras (one at each side of the tank where the fish are) and even though the quality is good, I require a single camera with a wide range to capture the whole tank from above. I have also tried a GoPro 3 hero, and the range is good, yet the image quality is not the best under the low light conditions of the room and I can't spot the fish when watching the videos. The room is illuminated mainly with red lamps. I would like your opinion on this - which type of camera I should be looking for and preferably with a software that allows controlling the camera through a computer/tablet. The tank is 7 metres in length and the ceiling above it around 3 metres high. Thank you!

04/03/2019
Category: Image Sensors

Hi, i have an application where I need to carry out colour inspection. How to handle such task? What kind of cameras and machine vision algorithms do you recommend? So far I have found out that comparing RGB values is not a good way.

03/29/2019
Category: Vision Software

We are a manufacturer that prints on continuous web whether it be opaque but mostly clear. The prints can consist of hundreds of designs and unlimited ink colors since we are a custom made to order company. These production runs could last for short period of time ~10min or anywhere to multiple hours. From my experience with vision and the challenges we produce we are trying to find a print inspection solution where the software could easily learn the print with minimal operator involvement and inspect the material for print defects such as print voids. Some challenges to know is that we do not having any registration marks on our product so it is a continuous web print could be within 54-62" wide. If anyone has any solutions or ideas please let me know, thanks in advance!

03/28/2019
Category: Vision Software

We are producing refrigerant, and we would like to make a visual inspection at the end of the process, so we are searching for a proper light color or intensity.

12/04/2018
Category: Non-Visible Imaging

Can you suggest a book or articles for those with no technical that explains how computer vision systems work?

10/13/2018
Category: Lighting Equipment

We’re looking for a solution to photograph bearings and shafts 7 and 3mm dia respectively after applying grease or adhesive during automated manufacturing. Photographs are close-ups (macros) and require focus stacking. Results are stored for later use in order to diagnose end of line tester and others.

09/02/2018
Category: Lighting Equipment

How do I hire a color science expert for either consulting or full-time employment?

08/29/2018
Category: Lighting Equipment

Which camera is most suitable for 3D scanning?

07/27/2018
Category: Image Sensors