News
« Back To Vision & Imaging News
Imperx manufactures ruggedized, high performance cameras for industrial applications. Combining extensive, easy-use features with the best CCD & CMOS sensors, Imperx cameras are available in resolutions from VGA-50 MP. Designed to perform to the highest standards in harsh environments including MIL STD 810G, the extended operating temperature is -40°C to +85°C with a MTBF > 660,000 hours @ 40°C. IMPERX camera outputs: 10GigE Vision® standard and over fiber, CoaXPress, GigE Vision®, Power over Ethernet, GigE with PoE, Camera Link®, U3V, CoaXPress and 3G/HD-SDI.
Content Filed Under:
Industry:
N/A
Application:
N/A
Hans Moller Joins IMPERX as Senior Hardware Engineer
POSTED 05/20/2014
IMP
"With Mr. Moller's extensive background and FPGA development skills, he is quickly becoming a valuable asset to our team," said Petko Dinev, CEO of IMPERX. "He is an accomplished design engineer who will bring new ideas and enhancements to our rapidly growing family of cameras and framegrabbers."
Mr. Moller has been a design engineer and system architect in South Florida for the last 25 years. He began working with Motorola Microprocessor based systems at Casi-Rusco and continued his career at General Electric (GE) where the design for regulatory compliance was integral. At this point, he became interested and started working more with FPGAs, both Xilinx and Altera's Cyclone FPGAs. He contributed to the switching power supply design and other low noise design practices. These were perfected while working on Fish-finders for Raymarine. He also designed highly sensitive radiation sensing equipment at Innovative American Technology (IAT).
Hans Moller's education includes a BSEE and a MSEE degree from Florida Atlantic University. His academic studies began in Norway with technical training and college classes, followed by studies at FAU. While majoring in electrical engineering at FAU, he also became involved in biomedical engineering. After completing his degrees in Electrical Engineering, he pursued further academic coursework at Purdue University in Indiana.
About IMPERX
IMPERX designs and manufactures industrial cameras, frame grabbers and advanced imaging solutions used in the machine vision, medical, military, aerospace, surveillance and automation markets. Our multi-service brand is recognized for superior performance, reliability, accuracy, and cutting-edge design. Headquartered in Boca Raton, FL, with offices and distributors worldwide, IMPERX is registered with Quality Management System ISO 9001:2008, Environmental Management System ISO 14001:2004 and is DDTC Registered.
"With Mr. Moller's extensive background and FPGA development skills, he is quickly becoming a valuable asset to our team," said Petko Dinev, CEO of IMPERX. "He is an accomplished design engineer who will bring new ideas and enhancements to our rapidly growing family of cameras and framegrabbers."
Mr. Moller has been a design engineer and system architect in South Florida for the last 25 years. He began working with Motorola Microprocessor based systems at Casi-Rusco and continued his career at General Electric (GE) where the design for regulatory compliance was integral. At this point, he became interested and started working more with FPGAs, both Xilinx and Altera's Cyclone FPGAs. He contributed to the switching power supply design and other low noise design practices. These were perfected while working on Fish-finders for Raymarine. He also designed highly sensitive radiation sensing equipment at Innovative American Technology (IAT).
Hans Moller's education includes a BSEE and a MSEE degree from Florida Atlantic University. His academic studies began in Norway with technical training and college classes, followed by studies at FAU. While majoring in electrical engineering at FAU, he also became involved in biomedical engineering. After completing his degrees in Electrical Engineering, he pursued further academic coursework at Purdue University in Indiana.
About IMPERX
IMPERX designs and manufactures industrial cameras, frame grabbers and advanced imaging solutions used in the machine vision, medical, military, aerospace, surveillance and automation markets. Our multi-service brand is recognized for superior performance, reliability, accuracy, and cutting-edge design. Headquartered in Boca Raton, FL, with offices and distributors worldwide, IMPERX is registered with Quality Management System ISO 9001:2008, Environmental Management System ISO 14001:2004 and is DDTC Registered.
Vision in Life Sciences
This content is part of the Vision in Life Sciences curated collection. To learn more about Vision in Life Sciences, click here.