Stäubli Plug & Play for Siemens TIA Portal

With uniVAL pi, Stäubli is now launching a software solution that will enable robot programming to be implemented in the future via the PLC, using Plug & Play in Siemens TIA Portal. Thanks to this optionally available communication interface, users can program Stäubli robots without manufacturer-specific, high-level language knowledge in their familiar environment - safely, quickly and efficiently.

As of now, all Stäubli kinematics can be ordered with the uniVAL pi option. In this configuration, the communication interface to the PLC is already fully developed. Analogous to the already known uniVAL plc solution, which was developed for programmable logic controllers of all common manufacturers, customers only need to connect the robot to the Siemens world even with the uniVAL pi version and can get started immediately. Whereas PLC and robot programming were two different worlds in the past, these tasks can now simply be handled centrally by the PLC programmer via the Siemens TIA Portal.

The plug & play solution brings decisive advantages, in particular uncomplicated integration of robots and faster commissioning. No interface problems or programming in VAL 3, just simple programming of the robot functionalities in the PLC - all this saves time and effort.

Importantly, the Stäubli controller continues to handle the internal path planning. This means that the excellent path behavior of Stäubli robots remains fully intact. In addition, users no longer need a backup strategy, as their data is stored centrally in the PLC. 

Another plus of PLC programming is that the extensive safety functions of the new Stäubli CS9 controller remains active. These safety functions run on an additional CPU that monitors the path planning of the regular CPU and then intervenes if the set parameters are exceeded. For example, if the robot were to move into a work area defined as a safe zone, the higher-level safety CPU takes over and brings it to a stop.

With the new uniVAL pi software, Stäubli has created a progressive solution that meets the increasing demands for simplified robot applications across all industrial environments.

For more information, please contact:

Sonja Koban

Marketing Manager & Division Business MarCom Manager

STÄUBLI TEC-SYSTEMS GMBH ROBOTICS

95448 Bayreuth / DE

Phone: +49 (0)921 883 3212 E-Mail: [email protected]

About Stäubli

Stäubli is a mechatronics solutions provider with three dedicated activities: Connectors, Robotics and Textile. With a global workforce of over 5,500, the company generates annual turnover surpassing 1.3 billion Swiss francs. Originally founded in 1892 as a small workshop in Horgen/Zurich, today Stäubli is an international group headquartered in Pfäffikon, Switzerland. Worldwide, Stäubli operates fourteen industrial production sites and 29 subsidiaries, expanded with a network of agents in 50 countries, delivering innovative solutions to all industrial sectors.

www.staubli.com/en/profile

About Stäubli Robotics

Stäubli Robotics is a leading global player in robotics, consistently delivering engineering as effective and reliable as our service and support. A complete solutions provider for digitally networked production, Stäubli offers a broad range of 4- and 6-axis robots including robotic arms designed specifically for sensitive environments, autonomous mobile robots, driver-less transport systems (AGVs) and cobots for human-robot collaboration.

www.staubli.com/robotics STÄUBLI Robotics | LinkedIn