« Back To Robotics News
igus Inc. Logo

Member Since 2005


igus® has been manufacturing engineered plastics for 50 years, and develops each of the materials and all technology behind its products. Committed to using its innovative polymer materials to develop products that provide creative solutions and exceed customer expectations while delivering fast, accurate service. igus®’ polymer blends are used throughout its range of product lines of cable carriers, plastic bushings, spherical bearings, and linear bearings, guides, and slide tables. With constant advancement and technological breakthroughs, igus® is continually expanding its range of materials, and performs rigorous testing to ensure every product meets and exceeds industry standards. igus® sales engineers are available throughout North America for on-site technical support, friendly customer service is available 8am – 8 pm, and igus® offers over 80,000 parts in stock, ready to ship as early as that day. igus® also offers 3D CAD files, samples, and online tools, all completely free.

Content Filed Under:



Protection for Moving Cables: igus® RX Tube Proves Itself in Real Conditions

POSTED 12/20/2013

rong>A laboratory test, carried out under tough conditions, shows tightness against chips for safely moving cables

East Providence, RI – If moving cables in the workspace of lathes, milling and sawing machines need protecting, cable carriers must be chip tight, while simultaneously guiding the cables with low abrasion. igus® RX tube proves itself in real conditionsFor this purpose, igus® has developed its first foldable plastic energy tube, the R68 in the Energy Chain System® line of cable carriers. This latest energy tube offers comprehensive protection against chips of any size.

All tests are not equal
In order to make claims about the tightness of energy tubes, those tubes must first be extensively tested. For over 10 years, igus has continually tested energy tubes in the igus laboratory in Cologne, Germany. The igus test series is done under real environmental conditions for the most accurate simulation outside of the application itself. igus has developed a standardized test to move energy tubes like the R68 over 100,000 double strokes. At the same time, a defined load of chips of different sizes are periodically poured over the tube, again and again. At the end of the cycles, testers analyze how many grams of chips were allowed into the interior of the tube.  The R68 energy tube was proven to allow only 0.23 grams of chips in over 100,000 double stokes with a feed of 1,000 grams of metal chips, equal to only .023% chip allowance.

Comparative testes with other manufacturers’ cable carriers show a much higher volume of chips allowed into the tube. The reason behind the better result from the R68 energy tube is its rounded profile. On its smooth and convex outer contour, the chips simply slide off the surface of the tube. The RX tube offers the best protection against chips due to its smooth contours and especially tight production tolerances: no chips got between the stoppers during the test, crucial to prevent changing the bend radius of the tube, which could disrupt or even inhibit the system from moving properly.

About igus®
igus® develops industry-leading Energy Chain® cable carriers, Chainflex® continuous-flex cables, DryLin® linear bearings and linear guides, iglide® plastic bushings, and igubal® spherical bearings. These seemingly unrelated products are linked together through a belief in making functionally advanced, yet affordable plastic components and assemblies. With plastic bearing experience since 1964, cable carrier experience since 1971 and continuous-flex cable since 1989, igus provides the right solution from over 80,000 products available from stock. No minimum order required.

Ellen Rathburn
Marketing Technical Copywriter
800.521.2747 x. 288