Recognition Robotics Inc. Product
Recognition Robotics Inc develops ground breaking visual recognition technology stemming from our discovery of how the human visual process functions.
Product filed under:
Sensors, Software & AI, and Vision Systems Sensors, Software & AI, and Vision Systems
MultiFocal 3D™ is a compact solid-state 3D sensor designed for precise measurement and inspection inside of confined geometries.
MultiFocal 3D™ is a compact solid-state 3D sensor designed for precise measurement and inspection inside of confined geometries. It captures dense point clouds without contact, moving parts, or manual alignment; enabling fast and repeatable inspection of holes, rivets, fasteners, and internal features in automated industrial systems.
The sensor can be mounted on a robotic arm and measure countersinks without ever piercing the plane of the substrate and without manually guiding to the hole. When the robot is in a pre-programmed starting position, the sensor locates the center of the hole, aligns the robot to it, and corrects robot position for normality before measuring.
Rivet Inspection
Fast, contactless inspection of all rivet types.
- Measures rivet center, orientation, ID, OD, and flushness
- Produces dense 3D point clouds (1.3M XYZ points per scan)
- Works on flat, curved, and perforated surfaces
- Guides robots for precise alignment and placement
- Ensures repeatable, high-accuracy inspection for aerospace, electronics, and industrial applications
Clinched Joint Inspection
Use MultiFocal 3D™ to inspect joints.
- Measures height, depth, and shape of the interlock
- Ensures proper material flow and joint integrity
- Works contactless, producing high-density point clouds for traceability
Grip Length
Fast, non-contact grip length measurement using high-density internal 3D point clouds for automated inspection and verification.
- Non-contact internal measurement
- Accurate stack-up verification
- Ideal for robotic inspection systems
Measurement
- Grip Length
- Hole Axis (X, Y, Z, Rx, Ry)
- Normality to surface (Rx, Ry)
- Inner Diameter (ID)
- Outer Diameter (OD / Countersink)
- Connector/Fiber Inspection
Connector/Fiber Inspection
These are typical examples of defects that MultiFocal 3D™ can detect in coaxial connectors
- Debris in connector – identifies unwanted particles or contamination inside of the connector bore
- Damaged potting and pin – inspects for cracks, missing material, or deformed pins
Applications & Capabilities
- Airframe inspection
- Connector measurement
- Tube internal geometry
- Microscopy
- Semiconductor inspection
- Transparent materials
- Advanced metrology
- Solder inspection
Other Products from Recognition Robotics Inc.
