Quasi Robotics Product
The smallest footprint in the C2 lineup. Zero-radius turning and 2.5 ft aisle access for tight spaces where standard AMRs can't operate. 150 lb payload.
Model C2 Mini
The Compact AMR Cart for Tight Spaces and Narrow Aisles
The Model C2 Mini is built for facilities where space is limited. Dense work-cells, narrow aisles, and congested floor plans often make autonomous transport difficult - the Mini's compact footprint and zero-radius turning capability bring automation to areas that larger AMRs simply cannot access.
Ideal For:
- Facilities with super narrow aisles less than 3 feet or dense work-cell layouts
- Cleanrooms, labs, and clinical environments with tight corridors
- Operations transporting smaller items, samples, or lightweight components
- Adding automation to legacy facilities with limited floor space
Key Specs
- Shelf area: 14.6 × 14.6 in (37 x 37 cm)
- Payload: 150 lbs (68 kg)
- Minimum aisle width: 2 ft+ (0.6 m+)
- Battery life: 12–16 hours
- Deployment time: ~45 minutes
- Typical ROI: 6–8 months
Complete Hardware and Software Solution
The C2 Mini is a complete hardware and software solution. Every unit ships ready to run, without infrastructure changes, floor tape, or programming required. Intuitive touchscreen controls allow operators to deploy without training downtime - simply map the facility with a quick walk-around, set your waypoints, and start moving materials the same day.
Advanced navigation settings, zone-based parameters, and multi-stop Route creation is handled via Cloud Connect a visual, browser-based interface. Software updates and feature upgrades delivered over-the-air for the lifetime of cart for continuous fleet improvement without additional cost or downtime.
The C2 Series Lineup of AMR Robotic Carts
The C2 Mini is part of a four-cart lineup, all running the same Q.AI navigation platform. For general-purpose transport in slightly wider aisles, see the C2 Standard. For heavier or oversized loads, see the C2 Large. For heavier or oversized loads, see the C2 Large. For panels and sheet materials, see the C2 PartPorter. All four run on the same Q.AI navigation platform and work together as a mixed fleet.
Live Virtual Demo Available
Want to see the C2 in action before the show? Get a live, no-pressure, virtual demo! Submit a quote request through this product page or contact us directly to book a time.
Other Products from Quasi Robotics
Model C2 Standard
Our flagship AMR cart balances capacity and maneuverability for your most common material transport tasks. 185 lb payload, 3 ft+ aisle navigation, 45-minute deployment.
Model C2 PartPorter
The only AMR cart designed specifically for panels, boards, and sheet materials. Open-back frame for easy loading, optional dividers to protect finished surfaces. 265 lb payload.