Industrial Safety Controls Inc Product
Member Since 2023
ISC, Inc. specializes in all aspect of machine safety and safeguarding, sensing and select control related products. We also provide machine safeguarding evaluation services. Regardless of your industry you will find products that will address your most difficult applications.
Product filed under:
Controls, Drives & Amplifiers, and Safety Products Controls, Drives & Amplifiers, and Safety Products
Smart motorstarter, for Modbus UG 9410
Model: Smart motorstarter, for Modbus UG 9410
The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors.
Product description
The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life.
Technical specifications
| Width: | 22,5 mm |
| 1- / 3-phase: | 3 |
| Auxiliary voltage: | DC 24 V |
| Load voltage up to: | 3AC 200 - 480 V |
| Load current up to: | 5 A |
| Bus interface: | Modbus RTU |
| Temperature monitoring: | Yes |
| Type: | UG 9410 |
Advantages
- Widely used measuring and automation protocol
- Up to 7 functions in one device
- Reversing anticlockwise,
- Reversing clockwise
- Softstart
- Softstop
- Motor protection
- Phase sequence monitoring
- Phase failure monitoring
- Communication monitoring - 80 % less space
- Simple and time-saving commissioning as well as user-friendly
- Operation through parameterization via modbus
- Hybrid relay combines benefits of relay technology with non-wearing semiconductor technology
- High availablility by
- Temperature monitoring of semiconductors
- High withstand voltage up to 1500 V
- Load free relay reversing function
- Device overload - Pluggable clamps
- TWIN- connection terminals to loop auxiliary supply and Bus
Features
- According to IEC/EN 60947-4-2
- Modbus RTU-interface
- To reverse 3 phase motors up to 0.18 kW ... 2.2 kW at 400 V
- 2-phase softstart, softstop
- 3 potentiometer for setting the modbus adress and baud rate
- 5 LEDs for status indication
- Reversing with relays without current, softstart, softstop with thyristor
- Galvanic separation between control circuit and power circuit
- Width: 22.5 mm
Other Products from Industrial Safety Controls Inc
DOLD LG 5925/900 Emergency Stop Relay Light Curtains
Emergency Stop Relay Module According to - Performance Level (PL) e and category 4 to EN ISO 13849-1 - SIL Claimed Level
DOLD Relay Extension Module BN 3081
If more safety cicuits have to be switched, than a safety module provides, the extension module BN 3081 is used.