Industrial Indexing Systems, Inc Product

When in EMAX mode, one Emerald Drive can be programmed as a stand-alone combination position controller and drive for single-motor

Image of Emax Positioner/Drive

When in EMAX mode, one Emerald Drive can be programmed as a stand-alone combination position controller and drive for single-motor applications. Just as a multi-axis Emerald system, you use the same programming language with the EMAX as the EMC-2100 programmable automation controller. Standardizing on drive hardware can reduce spares inventory.

The Emerald Series servo drives and motors use the latest servo technology to bring cost-effective solutions to the automation market. A wide range of sizes and feature-rich capabilities make the Emerald servo drive the most versatile servo system on the market. Incorporating advanced control design minimizes hardware cost while maximizing performance.

EMERALD EMAX FEATURES

  • Analog I/O, one +/- 10 volt input and one PWM style output.
  • Auxiliary encoder, ABZ RS422 interface with an optional resolver interface also available.
  • Two high-speed position “trap” inputs for storing a snap shot of a encoder position relative to a sensor to provide web or product registration control.
  • The Extended I/O bus will interface up to two Emerald 16 position I/O racks (ESD-IO16) providing an additional 32 I/O points per drive. Two rack types are available to meet AC, DC, low voltage, and high voltage requirements.
  • Seven segment status display for quick fault determination.
  • Watchdog timer with safety loop contact for external shut-down control.
  • High-speed digital signal processing (DSP) hardware to control motor position, velocity and torque.
  • Selectable current loop switching frequency; Choose the 16 KHz frequency when maximum performance and minimum audible noise is required or choose either 4 or 8 KHz for maximum power.
  • USB port for easy interfacing to laptop PC for programming, drive diagnostic and setup procedures.
  • Designed to operate in the industrial environment at temperatures of up to 55°C at full rated power

The Emerald EMAX is available in 7 size ranges: 5, 10, 20, 40 and 60 amp @ 220 VAC and 25 and 50 amp @ 440 VAC. Emerald servo motors are available from 400W to 21Kw, 1500 to 6000 RPM rated speeds with low and medium rotor inertia versions.

 

In single-axis applications, the Emerald drive can be enabled as a stand-alone position controller and drive combination (EMAX mode).

Other Products from Industrial Indexing Systems, Inc

Emerald Automation Controller Image

Emerald Automation Controller

The Emerald Automation Controller is an open architecture high performance multi-axis motion controller designed for demanding applications that require close

Shibaura Machine Products Image

Shibaura Machine Products

The Shibaura/Toshiba Machine X Series provides high performance servo products at competitive prices. Easy configuration adjustments makes set up simple.