Member Since 1994

LEARN MORE

AMT creatively solves robotic automation challenges. We provide complete engineered solutions with talented, experienced engineers and NO product or hardware agenda. This allows us to offer a unique and unbiased automation solution that fit your robotic automation needs regardless of size. We offer the AMT Advantage, which separates us from the pack. We have over 25 years as a full-service Automation Solutions Integrator with the unique ability to engage with a manufacturer at any point in their process. "We never intended to be just another automation robotics & engineering firm. Our experience and skill in applying manufacturing technology is unsurpassed in the industry," CEO Mike Jacobs. At AMT, we have successfully built a company of relevant automation robotics technologies under one roof with a depth of knowledge and experience that exists solely to add value to our customers’ performance. Let us show you how your company can benefit from our experience.

Content Filed Under:

Industry:
N/A N/A

Application:
N/A N/A

Move, Measure, Correct: Making Robots More Accurate than They're Supposed to Be

POSTED 12/10/2020

 | By: David McMillan, Senior Application Engineer

David McMillaneBook by Senior Application Engineer David McMillan. David has been in the robotics industry for more than 20 years, and is one of AMT’s go-to people for new or unusual technologies. For more information on AMT’s expertise in robotic applications.

 

After my previous article about making industrial robots more accurate through various passive procedures and best-practice techniques, there was an immediate outcry: “But what if we need even better accuracy?” (Well, I assume there was. I’m sure the reason I didn’t get any messages to that effect was the fault of the carrier pigeons in the email system going astray. I blame sunspots.)

Put very briefly, squeezing the maximum accuracy out of any normal industrial robot without adding additional hardware boils down to reducing every variable possible – minimizing motion, using anti-backlash techniques, performing calibrations in limited volumes with the actual working payloads, and so on. But all these techniques can only go so far. At some point, there’s simply an irreducible noise threshold that cannot be lowered. And even if the noise threshold is sufficient to your application 99% of the time, some applications need 99.9%+, or have very serious consequences or even rare failures. So, here’s our hypothetical situation: after applying all the techniques and lessons from the previous article, our robot still isn’t accurate enough. What’s the next step?

Visit AMT's website to read the full eBook.

If you have questions about a specific application, please contact AMT.