Rising to the Challenge: Adopting Epson Cleanroom SCARA Robots for Medical Syringe Manufacturing
For more than 35 years, NuTec Tooling Systems has designed and manufactured an extensive range of electromechanical
automation solutions. The company specializes in solving the unique challenges of contract manufacturers and operations that produce complex components. Its team of experienced engineers and project managers help customers develop a clear vision of automated processes and then deliver custom projects that align with their goals.
Given these attributes, it comes as no surprise that a large pharmaceutical OEM who needed to automate a process in the manufacturing of medical syringes came to NuTec for help. The request from the customer was to develop a new machine to automate the handling of syringe manufacturing using a proprietary coating process that would give plastic syringes properties similar to glass.
Historically, the OEM's competitors produced syringes from glass, which is more costly than using plastic. The OEM's new process, especially when automated, would reduce costs and make mass production feasible.
The Medical and Life Science Industry Demands Precision with Repeatability
NuTec chose Epson's G6 Cleanroom SCARA robots for the automation solution they were tasked with. Epson is the #1 SCARA robot manufacturer in the world with four decades of expertise, so it was the logical choice to ensure a successful outcome for its client.
Epson’s 6Kg G-Series Cleanroom SCARA robots are well known for their fast, high precision and high repeatability assembly, pick and place capabilities. These attributes make them ideal for the medical sector and are the reasons they are frequently used when speed and precision are vital to the manufacturing process.
"Epson’s high-speed G6-Series SCARA robots with RC+ software enable precision processes with exceptional repeatability and reliability, delivering on NuTec’s brand promise of solving unique challenges with complex components.”
- BRENT MARTZ, DIRECTOR OF SALES AND
MARKETING, NUTEC TOOLING SYSTEMS
Operations in a Clean Environment
The concept phase of the syringe coating machine began in 2018, when engineers were challenged with how to
automate syringe manufacturing, including coating the inside of the syringe to achieve a glass-like finish. What’s
more, the machine had to be suited for cleanroom pharmaceutical manufacturing, an environment that requires very low particulate emissions and stringent cleanliness standards.
Epson SCARA robots are world renowned for their industrial reliability and performance capabilities. When combined with their ease of use and application versatility within the Epson RC+ development environment plus an ISO-3 rating and compliance with cleanroom standards, Epson proved to be the best choice for NuTec's design. The company ultimately employed four Epson SCARA G6
Cleanroom robots at various stations within the syringe coating machine.
Meeting the Challenge with Synchronized Performance
The first of Epson's G6 Cleanroom SCARA robots removes syringes from a tub in preparation for the coating process.
After the syringes are coated at a rate of 38 parts per minute, they pass through various inspection stations. The syringes are also siliconized, temporary caps are changed to final caps, and then they are x-ray inspected before they are added back into a plastic container by a second SCARA robot. Depending on production requirements, each container may contain 100 to 160 syringes.
A third SCARA robot picks up a full container, applies aninner and outer cover, and seals it before releasing it to the fourth and final Epson SCARA robot that applies a label with a laser marker.
NuTec chose to synchronize the third and fourth Epson SCARA robots within the same envelope, reducing a production step and
creating greater production efficiency.
Looking to the Future
The syringe coating machine, which was ready for operation in November 2020, proved to be a timely project. The OEM is now
working with government agencies to produce mass quantities of cost-effective syringes to use in the fight against COVID-19.
Even after the pandemic subsides, the need for innovative, cost effective medical solutions will continue to grow, and Epson's SCARA robots will deliver the precision and speed as well as safety and cleanroom standards of low particulate emission and
easy-to-clean surfaces required.
Medical and life science manufacturers will accept no less –for products that affect human health, quality standards can never be too high. The syringe coating machine is just one example of how Epson and its Platinum partner, NuTec Tooling Systems, are working
together, blending engineering expertise with highly adaptable robots to build machines that contribute to the future success of
the medical and life sciences industry.